SoCal Ultimate 4x4
  *

Login with username, password and session length
News: :flg: Welcome to the SCUFF...  Southern California's 4x4 Forum
 
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: 4.6 Stroker into 88 YJ Wiring HELP  (Read 349 times)
0 Members and 1 Guest are viewing this topic.
Nunner
Amateur Wheeler, expect no Body Damage
*
Offline Offline

Posts: 25
« on: April 24, 2009, 09:15:33 PM »
So I am dropping in a 4.6L Golen stoker in the YJ, I have everything in, no problem, but I often get confused while plugging appliances into household sockets, so I really need some help sorting out the harness (Off a 4.0), it also has a MSD ignition and I have no clue where to start, literally. I couldn't find a good writeup on wiring in this beast!

I have both new and old harnesses and I assume that I have to splice the two together but I don't know where to start, if anyone can give me a good walk through it would be MUCH appreciated.
Logged
'02 Wrangler TJ
'04 Rubi
'88 Wrangler YJ
'94 Grand Cherokee ZJ RIP FEB 25 2006
'47 CJ2A
Mikegyver1
Forum Moderator
Factory Sponsored Pro-Crawler, expect Catastrophic Body Damage
*****
Offline Offline

Posts: 2637


760 Ramona, CA
« Reply #1 on: April 25, 2009, 08:06:21 AM »
I'd have to look at what you've got.
Logged
What's on the other side? Maybe we should look first. (Na' it will give us something talk about later)
Mike
Nunner
Amateur Wheeler, expect no Body Damage
*
Offline Offline

Posts: 25
« Reply #2 on: April 25, 2009, 01:43:04 PM »
Ok I'm am completely confused on this, I think the Jeep has been re-wired at some point, so no colors or wiring diagrams coincide, can someone who has done a swap take pictures of where they spliced their wires at?
Logged
'02 Wrangler TJ
'04 Rubi
'88 Wrangler YJ
'94 Grand Cherokee ZJ RIP FEB 25 2006
'47 CJ2A
korda
Intermediate Wheeler, expect Minor Body Damage
**
Offline Offline

Posts: 68


WWW
« Reply #3 on: April 26, 2009, 07:01:33 PM »
I used this when putting in a SBC.  All the colors were correct on my YJ.



I pulled the wires out I didn't use.  I bought the Jeep with no engine and had about 12" of wire coming out of the bulkhead.
« Last Edit: April 26, 2009, 07:03:37 PM by korda » Logged
Josh
Twin City Off Road | Crawl 4 the Cure
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: